Do you have concrete flooring in your space? Perhaps, you may have noticed that these floor self-leveling are actually uneven no matter how perfect their appearance is. Well, if you are looking for a solution to level up your concrete floors, you’ve reached right there. In this guide, we’ll discuss how a floor self-leveling method could be a wonderful solution to this. So, continue reading to find out.
Why Concrete Floors Are Uneven?
Floors can become uneven with time because of several factors, but mainly due to moisture and cracking. So, whether you want to replace your existing uneven floor or refinish it, you’ll most likely level up your concrete floors. With the right techniques and equipment, you can level your uneven floor in just a few days.
When A Floor Self-Leveling Compound Is Required?
The use of a floor self-leveling compound depends on how much the concrete floor is uneven. You can use a long spirit level to accurately measure the unevenness of your floor.
Only use a floor self-leveling compound if the floor is 5mm out of level. Otherwise, not!
Mark High and Low Points on the Floor
Take a pencil or chalk and mark the areas where there are spots, dips, or bumps. Then sweep the floor over using a level to help reveal the missed depressions in the floor, if any.
The Types of Floor Self-Leveling Compound
Floor self-leveling compounds can be categorized into two main types. The first is a powder in which latex liquid comes in a separate container. To use this, simply combine both of them. The second type is a powder bag with the latex compound included. To prepare it, you just need to mix it with water. The latter type is much easier to use.
How To Apply A Floor Self-Leveling compound?
Laying a floor self-leveling compound involves the following steps.
- Clean the Floor
Start by removing everything from the room and then clean it with a good sweep followed by a vacuum cleaner.
- Fill Cracks in the Floor
Once your floor is cleaned, ensure all the large cracks are filled. You can do this by putting the nozzle of the filler or sealer bottle into the cracks and squeezing it out until the cracks are properly sealed. Alternatively, a trowel can be used to press the sealer/filler into the crack.
- Apply the Primer
Once cracks have filled, it’s time to apply the primer using a soft-bristle push broom. It needs to be completely dry after the application.
- Mix the Compound
Mix the compound with mixing until the right consistency is achieved. Make sure to not mix more than one bag as it gets dried after 15 to 20 minutes.
- Let the Concrete Leveler Dry
Once the compound has been completely applied on the floor, let it dry completely as per the manufacturer’s instructions. Some compounds dry quickly while others take some time. Now you can easily install other flooring types on top of your concrete floors.
So, this is all about floor self-leveling!